4 Best Corded Circular Saw: Reviewed By Our Experts

Circular Saws are useful tools for any person who is working a lot with wood. Whether you are a carpenter, a DIY woodworker, or just any sort of construction worker, you need to have the best-corded circular saw. Your work can only be as good as the tools you have.

There is a debate about cordless vs. corded circular saws. There are plenty of things to take into your buying decision, but it all boils down to your use case. If you want to take your circular saw to places and just do a few cuts, then a cordless circular saw is your best choice. Though if you need to have the circular saw running all day, then you should better take a corded version.

Reviews of the 4 Best Corded Circular Saws 

1 Skilsaw SPT77WML-01

Skilsaw SPT77WML-01

The Skilsaw SPT77WML-01 is one of the best-corded circular saw that comes with a worm drive. If you are looking for a worm drive, motor circular saw, this saw model is a serious contender for any loaded construction work. 

The Skilsaw SPT77WML-01 comes with a proprietary DualField motor capable of generating 15 amps of power. This lets this worm drive saw reach a speed of up to 5300 RPM. It’s quite lightweight as well. Since the saw has a magnesium structure, its weight is one of the lightest when compared to other saws of the same power range. It just weighs under 12 lbs. 

The Skilsaw circular saw has quick depth adjustment indents for the perfect cutting depth for ¼, ½, ¾, and 2x ply thickness. Its maximum cutting depth is 2 ⅜ of an inch at 90 degrees. The saw itself is a Skilsaw 7 ¼ inch blade made out of magnesium. 

The max bevel on the blade goes up to 53 degrees and has additional stops at both 0 degrees and 45 degrees. The indents are also positioned at the front and back plates for ease of use as well. 

The bevel and depth can be adjusted with a simple spindle lock lever mechanism. 

With a worm drive design, the Skilsaw is more maneuverable and easy to use. You can follow cutting lines easier with the motor being fitted to the back instead of to the side. It also comes with an added snag-guard to prevent the blade from catching easily. 


  • DualField Motor with 15 amp of power
  • 5300 RPM blade speed
  • The easy depth and bevel settings for quick adjustments 
  • Lightweight and maneuverable 
  • Large range of bevel angle 


  • Short Cord 
  • Saw ships without any oil in the gear housing 
  • No LED or sophisticated tools to follow cut lines

Check Prices

2 Dewalt DWE75SB

best corded circular saw 2022

Dewalt is a saw manufacturer with a pedigree, and it shows with the Dewalt DEW75SB. This lightweight and compact saw is one of the best corded circular saw currently available. Weighing in at just 8.8 lbs, it is light and maneuverable. Its special ergonomic design also means that your arms and wrists won’t suffer from hours of continuous work with this saw. 

The saw comes with a 7 ¼ inch saw blade with carbide-tipped teeth supported on its aluminum base plate even with its lightweight design.  

Its weight doesn’t compromise much on power either. The Dewalt saw can produce 1950 Max Watt Outs with its 15 amp sidewinder motor. The Dewalt DWE75SB can produce speeds of up to 5200 RPM with a bladeless load. 

The saw has a maximum depth capacity of 2 – 9/16 of an inch for cuts at the base angle. Even though the Dewalt DWE75SB might be low on power, it makes up with versatility. The bevel angle on this saw extends up to 57 degrees, with indent stops at 22.5 degrees and 45 degrees. 

The bevel and depth adjustment are done with a simple spindle lock system. There is also an easy mechanism to change blades with hex keys and a conveniently placed wrench in the back of the saw. 

This circular saw also has a surprisingly long electric cord right out of the bat with a 9 ft long electric cord. The cord also is made from a ToughCord system which reduces the chances of cord pullout from occurring. 

One of the best features of this saw is its automatic dust blowing system. The inbuilt dust blower ensures that the cut line remains visible by clearing the sawdust out of the way. The electric brake also adds greater safety for users when working with this saw. 


  • Lightweight and ergonomic 
  • Good cutting depth 
  • Good range of bevel tilt 
  • Electric Brake system 
  • Good quality electric cord 
  • Integrated dust blower


  • No additional cutting line aids 
  • Slow blade speeds mean slow cutting 
  • Blade wobbles

Check Prices

3 Bosch CS10

top corded circular saw

Bosch is one of the more affordable saws on our list; this doesn’t mean that it is not one of the best corded circular saws, though. 

Just like the Dewalt DWE75SB, the Bosch CS10 also comes with an integrated dust blower. The dust blower helps you in preserving your cut line by removing excess debris and sawdust. The Bosch CS10 also has a design with an unobstructed view of the cut line, which also increases cut precision. 

On the other hand, the direct hook system of the Bosch CS10 is just a simple hook that lets you hang the circular saw from any place. The hook connects to the housing itself, so you don’t need to worry about it ripping easily. 

The saw blade on the CS10 is a 24 teeth 7 ¼ inch carbide blade that can spin at 5600 when under no load. The power is provided by a solid 15 amp motor housed sidewinder style on the saw. 

As is typical of sidewinder models, it is not the lightest saw out there. It weighs around 10.2 lbs.  It does come with a magnesium footplate to improve the saw’s steadiness and precision and shave the weight down a little. 

You can utilize the easy-to-use bevel and depth levers from 0 degrees to 56 degrees of tilt, with additional stops at 22.5 degrees and 45 degrees. The depth gauge is specially made easy to read as well. It has a maximum cutting depth of 2 7/16 inches. 

Keep in mind though, if you are used to right-handed sidewinder models, the Bosch CS10 houses the motor on its left. This might be an issue for those who aren’t used to switching hands. 

Finally, the CS10 comes with a lower anti-snag guard and an easy-to-store wrench. 


  • Integrated dust blower
  • 24-teeth carbide 7 ¼ inch blade
  • 5600 RPM no-load speed
  • Relatively lightweight 
  • Clear cut line visuals 
  • Good range of bevel tilt


  • Leftside sidewinder housing might cause problems 
  • Unsteady housing
  • Levers are made from easily breakable plastic

Check Prices

4 Metabo HPT C7UR

DEWALT DCS391B 20V MAX Circular Saw

The Metabo HPT C7UR is one of the best corded circular saw in the market, even winning an award for the same category. 

Built by Metabo, the company previously known as Hitachi Tools, the HPT C7UR is a powerful circular saw. With its 15 amp motor housed in a sidewinder model, the HPT C7UR can produce 6800 RPM without any load. That is nearly 40% faster than most of its competition. 

Even with this much speed, there is no compromise on cutting depth. The C7UR can cut wood up to depths of 2 7/16 of an inch at 90 degrees and up to 1 ⅞ of an inch at 45 degrees of tilt. 

The cuts are made with the 7 ¼ inch, 24 teeth carbide VPR blade. 

When it comes to the bevel range, the C7UR has a range of 55 degrees and three stops at 0 degrees, 45 degrees, and 55 degrees. The more common 22.5 degrees stop is missing. 

The entire body of the HPT C7UR is made out of metal, and the base plate is made out of stamped aluminum. Even the levers are made out of metal for added durability. This saw is extremely durable and stable as a result. This also reduces the amount of vibration in the saw. 

Alongside a more ergonomic design, the reduced vibrations mean that you will have greater comfort when using the HPT C7UR for long work projects. 

As far as additional features go, this chainsaw has two. Firstly, there is the integrated dust blower which keeps your woodwork clean of debris and sawdust. This increases the precision with which you are working. 

The second additional feature that the Metabo has is its electric brake system. This allows you to stop the circular saw in motion with a simple press of a button. This feature is great for improving user safety. 


  • 6800 RPM, 40% faster than most of its competition 
  • All-metal body to improve durability and stability 
  • Integrated dust blower 
  • Electric Brake system 
  • 24 teeth, 7 ¼ inch carbide VPR blade
  • Ergonomic and user-friendly design
  • Good bevel range 


  • Expensive
  • Heavy 
  • Poor reputation of Hitachi Tools

Check Prices

Why Should You Buy A Circular Saw? 

A circular saw uses a disk of some kind to cut through various materials. The disk usually has abrasive or sharp teeth that do the cutting action. It’s one of the most important power tools available in your tool shed. 

It can make all kinds of cuts through wood. Whether it is cutting against the grain, cutting across the grain, or cutting with the grain of the wood, a circular saw can do it all. Since you can adjust the angle at which you are cutting, you can make various kinds of beveled cuts as well. 

While these things can be done by other saws like a miter saw or a table saw, a circular saw is just much more compact. While a miter saw might weigh about 26 lbs on average, and the table saw comes about at 69 lbs on average, the circular saw weighs just around 10 lbs. 

This portability makes circular saws invaluable. Not only can you carry it wherever you need, but it allows you to maneuver the saw safely. You can’t do that with heavier and larger power tools. 

If you work at home or a shop, a circular saw takes up much less space than the table saw or miter saw would. This is essential when it comes to working in smaller spaces like home workshops. 

Drawbacks of Circular Saws

This is not to say that circular saws are without their shortcomings. The biggest one is perhaps the most important one. They kickback. A lot. 

A kickback happens when a saw blade either catches or stalls in the wood that it is trying to cut through. This causes either the saw or the piece of wood to be flung back towards you at incredible speeds. 

This can cause serious injuries or even death if you aren’t careful. 

While all saws can kickback, circular saws are particularly prone to the problem. Since table saws and miter saws are heavier and more stable, they don’t kick back as often. The only other saw which kickbacks more than a circular saw is the chainsaw. 

How to Stop Kickback 

The most important thing to prevent kickback in a circular saw is to maintain the sharpness of the blade. You don’t want a dull or blunt blade when you’re woodworking. Those blades are more prone to getting caught in the wood and then causing a kickback. 

The best corded circular saw will have well-designed blades that don’t dull as quickly as other blades. This causes less kickback. 

You also need to set the bevel depth correctly. Since you can adjust the depth at which you are cutting when using a circular saw, you need to be careful not to choose a depth that is either too deep or too shallow. 

The best depth to cut at (for novices) would be around ⅛ of an inch higher than the lowest teeth or deepest gullet. The blade shouldn’t extend beyond ¼ – ½ of an inch past the board. When you are about to cut into the wood, always make sure that the base of the saw is fairly secured by tightening it. 

Whenever you are cutting your wood, ensure that you are entering into the wood only when your saw is running at full speed. You should never try to enter or exit cutting when your saw is not running at full power. 

The other alternative would be to start cutting from an idle position, but that is significantly riskier than using a saw running at full throttle already. 

This prevents the blade from catching in the wood because of insufficient power and then causing a kickback. 

Finally, always support the cutting wood properly. If you clamp your wood down too tight and secure, the blade might catch as the wood binds on to it. The wood pinches onto the blade because of compression and since there is no place for the wood to move to. 

Only secure your wood from across the cutting line. This secures the wood in a way that can prevent kickback. 

How to Choose the Best Corded Circular Saws 

There are a few different things to keep in mind when shopping for the best corded circular saw. Our experts have chosen the best corded circular saws based on the criteria below. 


The most important thing to look for in any kind of saw is its power. You want a powerful circular saw. A weak saw will not only spin slower, therefore cut slower, but it won’t be able to cut through tough material as well. 

Not to mention the fact that a slower spinning blade will dull quicker. The speed and blunt teeth in combination will cause kickbacks as well. 

The best corded circular saw will have, at the very least, 12 amps to 15 amps of power. 


Directly related to the power of the saw is its speed. A slow spinning blade can cause a lot of friction issues as well as cause increased chances of kickback. 

Another factor that affects the blade’s speed is its size, and weight, smaller and lighter blades spin faster but are much more unstable and can wobble due to the forces exerted on them at full throttle. 

Bevel Adjustment 

A circular saw will let you make cuts at various angles. That feature doesn’t hold a lot of weight if those cuts aren’t accurate, however. 

You want a saw where the bevel lever or knob is easy to operate. It should lock in position with ease and should unlock just as easily as well. The lock should be secure as well so that the angle doesn’t change during the cutting. 

Cutting Depth

The cutting depth of your saw is also important. It is determined not only by the diameter of the saw blade but also by the design of the saw housing.

 If you are working with bigger pieces of wood like 2x ply, then you need a circular saw to cut those pieces. Most of the best corded circular saws offer at the minimum at least 2 inches of cutting depth at 90 degrees. 

The deeper they can cut, the bigger pieces of wood that you use them on—especially when cutting at a bevel or tilt. If you are not going to work with large wood pieces, you can settle for a saw with a smaller cutting depth. 

Cut Lines 

The cut line allows you to line up your blade with your working wood. Usually, the cut line is made from notches or marks on the base plate. LED lights are also used in the best corded circular saws for better visibility. 

The features aren’t enough, make sure that you can see the cut lines when you’re testing out the saw.  


Since the entire point of getting a circular saw is for its portability, weight is an important factor to consider. If your circular saw is amazing in every regard but too heavy to carry anywhere, then it won’t see as much use as an inferior saw. 

Final Words 

Even though cordless tools are the rage, a corded circular saw is one of the most important and versatile tools that you can have. Getting the best corded circular saw means that you can do various kinds of cuts that wouldn’t be possible without a larger, heavier saw. 

That’s why Metabo HPT C7UR is the best corded circular saw in our lineup. Its incredible speed, all-metal housing, carbide VPR blade, and ergonomic design are superior to all of its competition and comes out on top. While some other saws that are better for certain niche uses, the Metabo HPT C7UR is the best corded circular saw overall. 


What is a Worm Drive and a Sidewinder Drive? 

A Worm Drive and a Sidewinder Drive refer to the motor’s position on a circular saw and its type. In a Sidewinder Drive saw, the motor is placed to the side of the blade. Usually to the right-hand side. A Worm Drive motor on the other hand is positioned at the back of the blade. 

Sidewinder models have a faster RPM because of the more efficient power transfer from the motor to the blade. The best circular saws can reach speed up to 6600 RPM. Worm drive models are much slower in comparison, only reaching about 4800 RPM. Where they lack in speed, they make up in torque to compensate. 

Sidewinder models are lighter and faster, but worm drive models are more powerful and more maneuverable. While both models are great, worm drive models are pricier. 

What kind of woodcuts can a circular saw make? 

A circular saw can make all kinds of cuts across the wood. With the help of a circular saw, you can make rip cuts (cutting wood with the grain), cross-cuts (cutting wood across the grain). miter cuts (cutting wood at an angle across it), plunge cuts (cutting the wood by starting the saw above it), and bevel cuts (cutting the wood with the blade at an angle). 

A circular saw can make other unusual cuts as well due to its lightweight and maneuverability. Those kinds of cuts wouldn’t be possible with heavier saws like the miter saw or table saw. 

While the circular saw is not particularly amazing at any one of these cuts, apart from the bevel cut perhaps, it can still do all of the cuts with ease. This is why circular saws are the jack of all trades within saws. 

Scroll to Top