Crown molding is a decorative feature placed where the ceiling and wall meet. It adds an Architectural element to the area.
Installing crown molding can be a little tricky. The moldings have to be cut at angles to fit into corners. This part is where miter saws come in. They make the job much easier.
Picking out a miter saw may be intimidating. Fret not, for we have done the research for you and listed all the things you need to keep in mind, along with the best miter saw for crown molding reviews. Read on to learn more.
How To Select a Miter Saw for Crown Molding
While picking out a miter saw for crown molding, a few factors should be kept in mind.
Type of Miter Saw
Broadly, there are three types of miter saws – standard, compound, and sliding.
Standard Miter Saw
These saws have a blade fixed to an arm, along with a rotating motor. They can create miter cuts of 45 degrees on both sides. Standard miter saws are ideal for basic projects but may not work well for professional needs.
Compound Miter Saw
The difference between a standard miter saw and a compound miter saw is that the compound version can create compound cuts.
A compound cut is nothing but a combination between a miter cut and a bevel cut. These cuts are crucial when it comes to crown molding.
Sliding Compound Miter Saw
Sliding compound miter saws have much better cutting capacity than the other two kinds. They come with giant blades that you can slide around for making more significant cuts.
These are perfect for crown molding because of their increased capacity and capability of cutting any angle.
Angles and Stops
Angles are likely the most challenging part of cutting crown moldings. If you cut at incorrect angles, it may leave you with gaps in the joints.
To make precise cuts, you need to be well aware of the crown molding angles and ensure your miter saw this angle stops. You could also look for a saw that is compatible with crown stop accessories.
The flat vertical surface against which you can place your workpiece is known as the fence of a miter saw. When it comes to crown moldings, the fence must be tall enough to support the width of the moldings.
To ensure clean and fine edges, select a blade with more than 60 teeth. The blade should also be a Fine Finish Blade. Otherwise, you may end up with rough edges, ruining the look of your molding.
Size of the Blade
As a rule of thumb, the blade of your miter saw should be double the size of your crown molding. Larger blades provide more versatility in cutting. For this purpose, a 12-inch miter saw is an ideal choice.
Dust Collection System
A dust collection system is vital in keeping your workspace clean. It also ensures you do not end up breathing in the dust generated while working.
All the dust gets stored in a bag behind the saw and can be disposed of quickly.
An efficient motor is the key element of the miter saw. The effectiveness of the saw depends on the engine. It also determines the durability of the machine.
The higher the amps of a saw, the more quickly you can cut through thick materials. A saw with 10 to 15 amps would have the necessary power and be excellent for cutting crown moldings.
Some saws come with laser lights that show precisely where the blade will cut. They are perfect for beginners or those who struggle with vision.
How to Cut Crown Molding with a Miter Saw
The process of using a miter saw and cutting a crown molding can be tricky. Let us go through the steps and understand them in detail.
Step 1: Prepare all the required tools. You need to have a suitable miter saw, the molding, a pair of safety glasses, and a dust mask.
Step 2: Check the angle on the saw and ensure it is 90 degrees. Your saw may or may not have preset tips for crown moldings. If it’s a manual saw, adjust the rotation of the miter saw and the bevel angle.
Step 3: Place the molding securely on a saw table. In case you do not have a table, use any flat surface. The side of the molding that you’ve finished should face up. Then, slide the molding to the right side to cut a piece for an outside corner. You may use clamps or even your hands to keep the molding in place.
Step 4: To cut for an inside corner, slide the molding to the left side and repeat the process.
Step 5: Adjust the molding upright and rotate the saw to adjust the angles and cut the left and right inside corners. Cut similarly as before.
With these steps, you should be able to cut your crown moldings using a miter saw successfully.
A few precautions to bear in mind:
- Compound miter saws tend to tilt towards the right. For this reason, it is ideal to use a double bevel miter saw.
- Always prepare the miter and bevel angles per the requirement of your crown molding.
- Thoroughly read the miter saw’s instruction manual to avoid injuries or other catastrophes.
- Practice a few times on scrap moldings so that you do not mess up your actual crown molding.
- Use earplugs to stay safe from the noise generated by the saw.
Best Miter Saw For Crown Molding Reviews
Let us examine the features, pros, and cons of the best miter saw for crown moldings.
1 Bosch Corded Dual-Bevel Sliding Glide Miter Saw
This Bosch Miter Saw is a common choice among professional woodworkers. It is a piece of highly durable and reliable equipment. The design is compact and easy to navigate.
The saw has a 15-amp motor and two square lock quick-release fences. They support extensive crown moldings with a 6 ½-inch vertical capacity and 6 ½-inch crown capacity.
The dust collection system has an efficiency of 90 percent. The saw also comes with incredible miter scales with detents and seven positive stops at standard angles for speed and efficiency. It has a dual bevel angle of 47 degrees to the left and right.
The unique Axial Glide system is revolutionary and perfect for tight workshops. The only bother might be the weight. At 88 pounds, this saw is on the heavier side.
This Bosch miter saw comes with a 30-day money-back guarantee and one year warranty.
While this is an excellent saw for crown molding, you can also use it for a lot of other woodwork. It is a tad more expensive than other saws, but the quality offered is entirely worth it.
- 15-amp motor and 3800 RPM
- Axial Glide system
- Highly versatile
2 DEWALT Double Bevel Sliding Compound Miter SawNo products found.
DEWALT is a pioneer in the field of saws. This double bevel sliding miter saw comes with a unique XPS lighting system, making it all the more accurate.
The saw has a powerful 15-amp motor that offers 3800 RPM. Contractors love this for its power and detent plate made of tough stainless steel. It also has sturdy guards, fences, and a bevel system.
This saw comes with a tall fence that supports 7½ inches of the nested crown and 6¾ inches of base molding vertically. The positive steps on the left and right are perfect for cutting crown moldings. It increases productivity while making repetitive cuts.
The angles range from 0 to 50 degrees to the right and 0 to 60 degrees to the left.
DEWALT provides users with a 3-year warranty and one year of incredible customer service. It may be a little expensive for home projects, but it is a good choice for those looking for a professional tool.
The DEWALT saw is ideal for remodeling, carpentry, and cutting down crown molding.
- Tall fence
- XPS light system
- Powerful motor
- In-built crown stops
- Sliding is rigid at first
No products found.
3 Hitachi Dual-Bevel Sliding Compound Miter Saw
This Hitachi sliding compound miter saw is not just practical but also affordable. It gives accurate results.
The saw boasts of zero rear clearance. It means that you can put it right on the wall. For smaller workshops, this is a boon.
It also comes with an adjustable laser light which helps make accurate cuts.
This saw has adjustable depth stops and positive stops for quick settings. When dealing with crown moldings, these features are highly advantageous.
It comes with a sliding fence to support extensive crown moldings up to 5⅛ inches and cut 7½-inch crown moldings vertically. It can tilt to 57 degrees on the right and 45 degrees to the left.
The saw also has a dust collector and a dust bag. It helps in keeping your workstation clean and ensures you don’t inhale any harmful particles. However, it is not so effective. Using a vacuum cleaner may be more helpful.
It has an elastomer grip to reduce vibrations and enhance control for precision. However, it weighs 59 pounds, not making it very easy to carry around.
- Large sliding fences
- Zero rear clearance
- Laser marker
- Elastomer grips
- 15-amp motor
- Poor dust collection
4 Craftsman Sliding Miter Saw Kit
The saw runs on the Craftsman V20 battery. Using its 4Ah battery, it can make 585 cuts in 3-¼ inch MDF baseboards. The powerful motor offers 3800 RPM. It also has an electric brake to stop the spinning faster when it is released.
It comes with a single bevel design that allows for a 47-degree angle to make compound cuts. The miter saw can cut up to 47 degrees on either side and has nine detent stops for increased precision.
The saw’s sliding capacity allows for crosscuts as wide as 8 inches when set at 90 degrees. It also has two rails for the motor to slide on, with a lock for increased safety.
The LED cut line helps in making more precise cuts and enhances visibility. The saw also has clamps to hold the material in place.
The saw comes with a dust bag included for easy clean-up of the workstation. This product has a 3-year limited warranty. Given its price, it is a pretty effective tool.
- Laser guide
- Side carry handles
- Powerful motor
- Accurate and speedy
- It doesn’t hold bevel angles well when switching sides.
5 Genesis Compound Miter Saw
The Genesis Compound Miter Saw comes with a 10-inch carbide blade with 60 teeth, making the cutting process very smooth.
The saw also has dual bevel capacities of 45 degrees to both the left and the right sides. It has nine positive stops, great for crown molding. It helps in saving time and providing more precise results.
The sliding head is advantageous as it helps you make longer cuts. The saw also has an electric brake that turns it off as soon when you push the button. This system also makes the tool much safer to use.
It comes with a spindle lock that helps you change blades quickly.
The 15-amp motor of the saw is powerful and gives 4600 RPM. The laser guide helps align the blade to ensure it cuts at the right place, resulting in enhanced precision. It is an excellent tool for crown moldings, ideal for beginners.
However, this saw is not entirely metal. Some of its parts are plastic.
- Sliding head
- Battery-powered laser guard system
- Aluminum base
- Arbor lock
- Quick-action electric brake
- Nine positive stops
- Extension wings
- Single bevel
- Plastic parts
The DEWALT 12-inch Sliding Compound Miter Saw is the best miter saw for crown moldings. It ensures excellent accuracy and power. With a 15-amp motor that offers 3800 RPM, you will be able to cut your moldings very easily.
It also comes with an impressive XPS lighting system. The lights show you exactly where the blade will cut, ensuring precision.
The positive stops of 0, 22.5, 33.9, 45, and 49 on the right and left sides are highly advantageous. They make cutting extensive crown moldings incredibly quick and easy.
It may be a little pricey, but the power offered by this saw and its efficiency is entirely worth the heavy price tag.
It is ideal if you’re looking for a lightweight, tall fence, powerful miter saw for cutting your crown moldings. The DEWALT 12-Inch Sliding Compound Double Bevel Miter Saw checks all the boxes. Get yours now!
Frequently Asked Questions (FAQs)
You may be overwhelmed by all that information and have some questions regarding the best miter saw for crown moldings. Read on as we explore some of the commonly asked questions.
Question 1: Should you paint the crown molding before installing it?
Yes, it would be best if you painted crown moldings before you install them on your ceiling. Apply a few coats of semi-gloss paint to match the room.
Some moldings come pre-primed. Always remember first to apply the primer.
Once the molding is ready onto the ceiling, you may face difficulties in painting. It is not easy to paint something so high up. Hence, it is better to paint your crown molding beforehand.
Question 2: What can you use instead of crown molding?
Crown molding can be a pricey project. If you’re looking to add new elements to your house, you can also consider a few other options.
- Picture Molding: It is a great alternative and is pretty easy to install. These moldings are thin and up for customization per your requirements.
- Paint: Painting is one of the least expensive ways to upgrade your ceiling. It is simple yet effective. Since it does not take up much time or money, you can keep changing the colors whenever you like, unlike pulling down crown molding.
- Wallpaper Border: These borders are incredibly convenient. They enhance the look of the room without spending too much.
- Medium-Density Fiberboard Molding: MDF boards are composed of hard and softwood residues. They resemble crown moldings very well and are much more reasonable.
- Peel and Stick Crown Molding: In this method, they use faux molding. It comes with an adhesive at the back, and you can shape it according to your area.
Question 3: Does crown molding add value to a house?
Yes, crown molding does add value to a house.
Depending on how much you have invested in the installation and how well they executed it, the molding can increase your house’s value and give great returns.
Homeowners often look for easy yet versatile renovations that can increase the value of their homes. Crown molding does so in various ways. It can make rooms look larger and make the colors pop. In older homes, it is an effective way of covering cracks in the ceiling.